Classification of scrapers
2017-11-08
Scrapers are mainly used for underground mining, shovel, etc. Scrapers are classified according to walking mode, traveling device, loading method, unloading method, bucket capacity, manipulation method, etc.
1. According to different walking modes, scrapers are divided into two types: towed and self-propelled.
1) Trailer scraper: It is often pulled by a crawler tractor at work. It has the advantages of small grounding specific pressure, large adhesion capacity and strong climbing ability. It is widely used in projects with short transportation distances and soft and wet areas.
2) Self-propelled scraper: It has walking ability, and there are two types of walking devices: crawler type and tire type. The crawler self-propelled scraper is also called scraper bulldozer. Its bucket is directly installed in the middle of the two crawler belts, and it is used for working in areas such as short distance, narrow site and soft and wet areas.
2. According to the loading method, the scraper is divided into two types: lift type and ordinary type.
1) Lifting type: also known as chain plate loading type, a chain plate earth-moving mechanism is installed above the bucket blade to lift the soil cut by the blade into the bucket, thereby speeding up the soil loading process and reducing the load. Soil resistance, can effectively use its own power to achieve self-loading, can be loaded to the heap tip capacity without shovel machinery, and can be operated by a single machine. It should not be used when the soil contains large stones, and its economical distance is within 1000m.
2) Ordinary type: also known as open bucket shovel type, relying on the traction force of the tractor and the thrust of the auxiliary shovel, the soil shovel is cut up with a shovel blade, and the soil chips are loaded into the bucket during operation, and its shovel loading resistance is relatively high. Big.
3. According to different unloading methods, scrapers can be divided into free unloading, semi-forced unloading and forced unloading.
1) Free unloading type: When the bucket is tilted (there are two types of forward and backward), the soil is unloaded by its own weight. This method of unloading requires low power, but the soil is not easy to unload (especially the soil that adheres to the sidewall of the bucket and the bottom of the bucket), and is generally only used for small-volume scrapers.
2) Semi-compulsory soil unloading type: the soil is unloaded by the self-weight of the soil when the bucket is inclined and the pushing action of the soil when the rear wall of the bucket bottom moves along the side wall. This method of unloading still cannot make the soil adhering to the side wall of the bucket and the bottom of the bucket to be unloaded cleanly.
3) Forced unloading type: The movable rear bucket wall (also called the unloading plate) is used to force the soil out of the bucket from the back to the front. The soil unloading effect is good, but the power consumed by moving the rear wall is large. Usually large and medium-sized scrapers use this method of unloading.
Four, according to the bucket capacity scrapers are divided into the following four categories:
1) Small scraper: the bucket capacity is less than 5m3;
2) Medium Scraper: Bucket capacity 5~15m3;
3) Large scraper: bucket capacity 15~30m3;
4) Extra-large scraper: the bucket capacity is more than 30m3;
5. According to the operation mode of the working mechanism, the scraper can be divided into three types: mechanical operation, hydraulic operation and electro-hydraulic operation:
1), mechanical control type: use power winches, steel cables and pulleys to control the movement of buckets, bucket doors and unloading plates. The structure is complex and the technology is backward, which has been gradually eliminated.
2) Hydraulic operation type: All parts of the working device are hydraulically operated, which can force the blade edge to cut into the soil. The structure is simple, the operation is light and flexible, the movement is uniform and stable, and it is widely used.
3) Electro-hydraulic control type: The operation is light and flexible, and it is easy to realize automation, which is the direction of future development.